EchoLife ET685 IP Phone User Manual
Quick IP Call Mode
Dial an IP address in the same LAN or VPN network by typing the last octet of the
IP address. This simulates a PBX function using the
server. In this mode, the contro
On the Advanced Settings page, set Use Quick IP-call Mode t
dialed (The range of x is 0–9 and xxx cannot be larger than 255.)
initiated as aaa.bbb.ccc.XXX. aaa.bbb.ccc is the local IP address r
s
ubnet m
as
k. The numbers #xx or #x are also valid.
The fol w
lo
ing is an example.
10.10.10.2 calls 10.10.10.3 — dial #3, followed by SEND.
10.10.10.2 calls 10.10.1
10.10.10.2 calls 10.10.10.123 –– dial #123, followed by SEND.
If the SIP server is c
the STUN, the direc
Port to No when completing direct IP calls.
Answering a Call
An incoming call: The phone rings. The corresponding account LINEx blinks
Pick up the handset, press
key to answer the call.
Multiple incoming calls: The call waiting tone is played. Th
will blink in red. Answer an incoming call by pressing the LINEx key.
DND
To block all incoming calls, you can enable the D
ring when an incoming ca
Use eith r of the following methods to enable DND function:
e
Method 1: When the phone is in idle mode, press DND to enable the DND func
and press DND again to disable the DND function.
Method 2: Toggle the DND function as follows:
Step 1
Press MENU.
lled static IP address is recommended.
0.23 –– dial #23, followed by SEND.
onf
igured, a direct IP-IP call still works. If you use
t IP-IP call also uses the STUN. Set Use Random
, enable the headset, or press the blinking LINEx
ll comes.
30
5 Using
the eSpace 6870
CMSA or CD without a SIP
o Yes. When #xxx is
, a direct IP call is
egardless of the
e next available line
ND function. The phone will not
.
tion