One-Key Switch (For Espace Uc2.0); Buttons; Line & Programmable Buttons - Huawei eSpace 7910 User Manual

eSpace 7910 IP Phone
User Guide
Step 1 On the web page, choose Call Settings > Auto Dial.
Step 2 Select Enable and set Dial After.
Step 3 Click Save.
----End

4.3.6 One-Key Switch (for eSpace UC2.0)

If the destination number for one-key switch is not set for your account on the server, you can
perform the following steps to set this number:
Step 1 On the phone web page, choose Call SettingsOne-Key Switch.
Step 2 Enter the destination number for one-key switch and click Save.
----End

4.4 Buttons

4.4.1 Line & Programmable Buttons
Setting the Line Buttons
You can perform the following operations to set the line button:
Step 1 On the web page, choose Buttons > Line & Programmable Buttons.
Step 2 Click the gray button next to the line button.
The Select Programmable Button Functions page is displayed.
Step 3 Select a function to use and set the parameters.
Table 3-1
Step 4 Click Save.
----End
Setting the Programmable Buttons
You can perform the following operations to set the programmable button:
Step 1 On the web page, choose Buttons > Line & Programmable Buttons.
Step 2 Click the gray button next to the programmable button.
The Select Programmable Button Functions page is displayed.
Step 3 Select a function to use and set the parameters.
Table 3-1
Issue 04 (2014-01-18)
NOTE
It is recommended that you not use a line button as a programmable button.
describes the functions and parameters of the programmable button.
describes the functions and parameters of the programmable button.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Web Page Settings
29