Table of Contents
Advertisement
•
Never spray while people, especially children or
pets are nearby.
•
Before operating the sprayer, always check the
designated areas of the sprayer that are stated in
the Pre-Starting Checks in the Operation section.
If the machine does not function correctly or is
damaged in any way, do not use the sprayer.
Make sure that the problem is corrected before the
sprayer or attachment is operated.
•
Make sure that the operator and passenger area
are clean and free from chemical residue and
debris buildup.
•
Ensure that all fluid line connectors are tight and
all hoses are in good condition before applying
pressure to the system.
Note:
Do not use the sprayer if it is leaking or
damaged.
Chemical Safety
WARNING
Chemical substances used in the
spreader-sprayer system may be hazardous
and toxic to you, bystanders, animals, plants,
soils or other property.
• Carefully read and follow the chemical
warning labels and Material Safety Data
Sheets (MSDS) for all chemicals used and
protect yourself according to the chemical
manufacturer's recommendations. Ensure
that as little skin as possible is exposed
while using chemicals. Use appropriate
Personal Protective Equipment (PPE)
to guard against personal contact with
chemicals, such as:
– safety glasses, goggles, and/or face
shield
– respirator or filter mask
– chemical resistant gloves
– rubber boots or other substantial
footwear
– hearing protection
– clean change of clothes, soap, and
disposable towels, to be kept on-hand,
in the event of a chemical spill.
• Keep in mind that there may be more than
one chemical used, and information on
each chemical should be assessed.
• Refuse to operate or work on the sprayer if
this information is not available!
• Before working on a sprayer system,
make sure that the system has been
triple rinsed and neutralized according
to the recommendations of the chemical
manufacturer(s) and all of the valves have
been cycled 3 times.
• Verify there is an adequate supply of clean
water and soap nearby, and immediately
wash off any chemicals that contact you.
•
Obtain proper training before using or handling
chemicals.
•
Use the correct chemical for the job.
•
Follow the chemical manufacturer's instructions for
the safe application of the chemical. Do not exceed
recommended system application pressure.
•
Do not fill, calibrate, or clean the unit when people,
especially children, or pets are in the area.
5
Advertisement
Table of Contents
