Toro Multi Pro ExcelaRate 5800-G Operator's Manual page 77

Removing the Section-Manifold
Valve
1. Remove the clamps and gaskets that secure the
manifold for the section valve to the adjacent
section valve (if left, section valve and the
reducer coupling) as shown in
Figure 99
1. Flange (reducer coupling)
2. Manifold (section valve)
3. Flange (adjacent section
valve)
2. Remove the retainer that secures the
section-valve manifold to the bypass fitting
(Figure 100).
Figure 99.
g028236
4. Gasket
5. Flange clamp
1. Retainer
2. Socket (bypass fitting)
3. Remove the section-valve manifold from the
machine (Figure
1. Bypass fitting
77
Figure 100
3. Manifold-valve assembly
4. Socket (outlet fitting)
101).
Figure 101
2. Section-valve manifold
g032548
g032549