Table of Contents
Advertisement
Figure 72
1. Screws (#10 x 3/4 inch)
2. Cover
3. Fuel tank
4. 2-socket connector
(machine—wiring
harness)
5. 2-pin connector (fuel
pump/sending unit)
6. 2-pin connector
(machine-wiring harness)
3.
Disconnect the 2-socket connector of the
machine-wiring harness from the 2-pin
connector of the fuel pump/sending unit;
disconnect the 2-pin connector of the
machine-wiring harness from the 2-socket
connector of the fuel pump/sending unit
72).
4.
Slide the locking sleeve of the fuel-hose coupling
away from the fitting of the fuel pump/sending
unit and remove the coupling and hose from the
fitting
(Figure
72).
Note:
Clean up any fuel that flows from the
hose coupling or fuel-pump fitting.
7. 2-socket connector (fuel
pump/sending unit)
8. Nut (fuel pump/sending
unit)
9. Seal
10. Fuel-hose coupling
11. Fitting (fuel pump)
(Figure
5.
Rotate the nut for the fuel pump/sending unit
counterclockwise and remove the nut and seal
(Figure
72)
6.
Carefully lift and rotate the fuel pump/sending
unit out of the neck of the fuel tank
Important:
fuel pump/sending unit to avoid damaging
the arm for the float of the sending unit.
g032542
1. Fuel-tank neck
2. Arm (sending-unit float)
3. Pickup tube (fuel filter)
59
Use caution when handling the
Figure 73
4. Fuel pump/sending unit
5. Filter
6. Float
(Figure
73).
g032543
Advertisement
Table of Contents
