Table of Contents
Advertisement
Installing the Agitation-Manifold
Valve
1.
Align the flange of the agitation-bypass valve,
a gasket, and the end-cap-fitting flange of the
agitation-valve manifold (A of
Note:
If needed, loosen the mounting hardware
for the pressure filter head as needed to provide
clearance.
Figure 106
1. Flange (pressure-filter
head)
2. Flange (agitation-bypass
valve)
3. Flange (reducer coupling)
4. Flange clamp
2.
Assemble the agitation-bypass valve, gasket,
and agitation-valve manifold with a clamp
tightened hand tight (A of
3.
Secure the quick connect to the bypass fitting by
inserting a retainer into the socket of the bypass
fitting (A of
Figure
4.
Align a gasket between the flanges of the
pressure-filter head and the agitation-valve
manifold (B of
Figure
5.
Assemble the pressure-filter head, gasket, and
agitation-valve manifold with a clamp tightened
hand tight (B
ofFigure
Figure
106).
5. Gasket
6. Quick connect
7. Manifold (agitation valve)
8. Flange
(manifold—agitation
valve)
Figure
106).
106).
106).
106).
6.
Align a gasket between the flanges of the
agitation-valve manifold and the reducer
coupling (B
7.
Assemble the agitation-valve manifold, gasket,
and reducer coupling with a clamp tightened
hand tight (B of
8.
If you loosened the mounting hardware for the
pressure-filter head, tighten the nut and bolt to
1978 to 2542 N∙cm (175 to 225 in-lb).
Installing the Section-Manifold
Valve
1.
Insert the upper end-cap fitting of the manifold
valve into the bypass fitting (A of
Note:
If needed, loosen the mounting hardware
for the bypass valve as needed to provide
clearance.
g032551
1. Flange (reducer coupling)
2. Socket (bypass fitting)
3. Bypass valve
4. Flange (adjacent
manifold—agitation valve)
5. End-cap fitting
(manifold-valve assembly)
2.
Secure the end-cap fitting to the bypass fitting
by inserting a retainer into the socket of the
bypass fitting (A of
3.
Assemble the outlet fitting onto the lower
end-cap fitting of the manifold valve (A of
107).
80
ofFigure
106).
Figure
106).
Figure
Figure 107
6. Socket (outlet fitting)
7. Retainer
8. Flange (manifold—section
valve)
9. Gasket
10. Flange clamp
Figure
107).
107).
g032552
Figure
Advertisement
Table of Contents
