Happybeds Stockwell 2 Drawer Bedside Table Assembly Instructions Manual

PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

ASSEMBLY:

Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber inside the accessories pack.
HEALTH & SAFETY:
DO NOT
use this product if any parts are missing, damaged or worn.
DO NOT
use this product unless all fixings are secured.
Always use on a level, even surface.
Stockwell 2 Drawer Bedside
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT
push this product as this will cause damage.
Always lift this product with two people to reposition.
Keep any sharp objects away from this product .
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.
Assembly Instructions
Table
1
www.happybeds.co.uk