Troubleshooting - Arjohuntleigh ALPHA ACTIVE 3 Instructions For Use Manual

8. Troubleshooting

The following table provides a troubleshooting guide for the system
Alpha Active 3
in the event of malfunction.
Indicator Possible Cause Remedy
LOW PRESSURE The tube-set is not connected Check the tube-set connector
properly. and ensure it is securely fitted to
the pump.
CPR not fully closed. Close CPR unit.
There is a leak in the system. Call service engineer.
POWER FAILURE Power has been removed from Re-apply power or switch the
the pump. pump off.
SERVICE Pump has detected an internal Switch the pump off and call
fault. service engineer.
15