LEGRAND Server Technology PRO3X Network Connection Setup Manual page 4

Appendix D: More Information
Identifying the Sensor Port
Warning: If you purchase Raritan's environmental sensor
packages, make sure you connect them to the correct port on
the PRO3X, or damages may be caused to PRO3X and/or
connected sensor packages.
How to identify the SENSOR port:
• The correct port is labeled SENSOR.
• The SENSOR port is marked with YELLOW on a PRO3X PDU,
as shown below.
Threaded Grounding Point
If the PRO3X model you purchased is designed to have a
threaded grounding point, you can identify it via the grounding
symbol as shown below:
Wire this point to an electrical system in order to protectively
ground the PRO3X.
Additional Information
For more information about PRO3X and the entire Server
Technology product line, see Server Technology's website
(www.servertech.com). For technical issues, contact Server
Technology Technical Support. See the Contact Support page in the
Support section on Server Technology's website for technical
support contact information worldwide.
Server Technology PRO3X Network Setup Guide v01
QSG-PRO3X
4