Avaya Aura Communication Manager Configuration
This section describes the Avaya Aura Communication Manager (Avaya CM) configuration
necessary to integrate the Crestron Avia DSP devices in secure mode.
NOTE:
Confirm that the general installation and basic Avaya CM configuration have
been administered.
Node Names
Configure the node IP for Avaya Aura Session Manager (SM) and Avaya CM.
Use the change name-names ip command to add the node name. This example adds ASM1
and procr with their respective IPs.
Use ASM1, an Avaya Aura Session Manager, to register the SIP phones and
l
third-party SIP devices.
User procr to register SIP trunk between Avaya CM and Avaya SM.
l
Avaya Aura CM: Configure Node
12 • DSP-1282 & DSP-1283: Secure SIP Endpoint with Avaya Aura 7.1
Configuration Guide — 8340B