Codecs; Signaling Group - Crestron Avia DSP Series Configuration Manual

Codecs

Use the change ip-codec-set command to define a list of codecs to use for calls between
the PBX and PSTN.
Avaya Aura CM: Codec Configuration
This example uses 1 for the Codec Set. The Crestron DSP device supports and includes
G.711A and G.711MU in this set. To test with the DSP, enter G.711A and G.711MU in the Audio
Codec column of the table. Use default values for all other fields. Configure media
encryption (SRTP and SRTCP). The Media Encryption section shows sample values.

Signaling Group

This example configures two signaling groups.
Signaling Group 3
l
This group supports communication between SM and CM for SIP phone registration
and features.
Signaling Group 10
l
This group supports PSTN calling on ISDN-PRI.
Configuration Guide — 8340B DSP-1282 & DSP-1283: Secure SIP Endpoint with Avaya Aura 7.1 • 15