Trunk Groups; Trunk Group 3 - Crestron Avia DSP Series Configuration Manual

Trunk Groups

Configure two trunk groups (for this example):

Trunk Group 3

l
This group accesses the stations registered to the Avaya Session Manager.
Trunk Group 10
l
This group sends a 10/11-digit calling number to PRI trunk or PSTN.
Use the add trunk group n command to add a new trunk group (where n represents the
trunk group number).
Trunk Group 3
Avaya Aura CM: Trunk Group to Session Manager - Trunk Group 3 (1/4)
Configure Trunk Group 3 (entries for steps 1 through 7 are for this example):
1. Enter 3 for the Group Number.
2. Enter SIP Phone for the Group Name.
3. Enter sip for the Group Type.
4. Enter tie for the Service Type.
5. Enter #003 for the TAC.
6. Enter 3 for the Signaling Group.
7. Enter 10 for the Number of Members.
18 • DSP-1282 & DSP-1283: Secure SIP Endpoint with Avaya Aura 7.1 Configuration Guide — 8340B