Configure The Sip Parameters - Crestron Avia DSP Series Configuration Manual

3. Under Phone\Sig Gen In, click PHN. In the new window set the following:
a. Move the Receive Level slider to 0 db.
b. Click Mute to Off.
Crestron Avia Tool: Audio Output Configuration (3/3)

Configure the SIP Parameters

From the open PHN - In 1 - Phone Receive window, select and configure the SIP
parameters.
1. With SIP selected, click the chevron at the right top corner to expand the window.
Crestron Avia Tool: Phone Dialer, SIP Parameters Configuration
2. Enter the extension configured on Avaya Aura CM for the Local Extension for this
device. This example uses 6625.
3. Enter the Avaya Aura Session Manager PBX for the SIP Server IP Address. This
example uses 10.89.26.7.
4. Enter the SIP server port (5061) for the Port.
5. Enter the same end user name configured for the Avaya Aura Session Manager with
the digest authentication credentials for the SIP Server User Name..
6. Enter the same password as configured for the Avaya Aura Session Manager end
user digest credentials for the SIP Server Password.
Configuration Guide — 8340B DSP-1282 & DSP-1283: Secure SIP Endpoint with Avaya Aura 7.1 • 9