Husqvarna AX 36 Operator's Manual page 10

F
Vibrator head AX90
End cap (F)
Screw (G)
To disassemble the hose (AX 36, AX
40)
1. Cut and discard the hose clamps (A).
D
E
F
A
2. Remove the screws (B), remove the switch box
cover and disconnect all wires from the switch.
3. Cut the collar (D).
4. Remove the hose (E) from the switch box.
5. Remove the cable lock and pull out the wires from
the hose on the switch box side.
6. Remove the cable holder from the switch box and
remove the gland (F).
7. Remove the switch.
10
G
Threadlocker
LOCTITE
LOCTITE
B
A
C
® ™
638
® ™
243
To disassemble the hose (AX 48, AX
56, AX 65)
1. Cut and discard the hose clamps (A).
D
E
F
A
B
2. Remove the screws (B), remove the switch box
cover and disconnect all wires from the switch.
3. Cut the collar (D).
4. Remove the hose (E) from the switch box.
5. Remove the cable lock and pull out the wires from
the hose on the switch box side.
6. Remove the cable holder from the switch box and
remove the gland (F).
7. Remove the switch.
To assemble the hose (AX 36, AX 40,
AX 48, AX 56, AX 65)
1. Assemble the hose in the opposite order to how it
was disassembled.
Tightening torque, Nm
1200
N/A
A
C
1006 - 002 - 27.03.2020