Advertisement
g) If the machine should start making any unusual noise or vibration, immediately shut
off the power source and allow the machine to stop. Remove the battery pack from the
machine and take the following steps before restarting and operating the machine:
i) inspect for damage;
ii) replace or repair any damaged parts;
iii) check for and tighten any loose parts.
h) Do not allow processed material to build up in the discharge zone; this may
prevent proper discharge and can result in kickback of material through the intake
opening.
i) If the machine becomes clogged, shut-off the power source and remove the
battery pack from the machine before cleaning debris.
j) Never operate the machine with defective guards or shields, or without safety
devices
k) Keep the power source clean of debris and other accumulations to prevent
damage to the power source or possible fire.
l) Do not transport this machine while the power source is running.
m) Always disconnect the machine from the power supply ( e.g.remove the
battery pack from the machine)
- whenever you leave the machine,
- before clearing blockages or unclogging chute,
- before checking, cleaning or working on the machine.
n) Avoid using the machine in bad weather conditions especially when there is a risk
of lightning.
4) Maintenance and storage
a)
Keep all nuts, bolts and screws tight to be sure the appliance is in safe working
condition.
b)
Replace worn or damaged parts.
c)
Use only genuine replacement parts and accessories.
d)
Store the machine in a dry place out of the reach of children .
e)
When the machine is stopped for servicing, inspection, or storage, or to change an
accessory, shut off the power source, disconnect the machine from the supply and
make sure that all moving parts are come to a complete s top. Allow the machine
to cool before making any inspections, adjustments, etc. Maintain the machine with
care and keep it clean.
f)
Store the machine in a dry place out of the reach of children.
g)
Always allow the machine to cool before storing.
h)
Never attempt to override the interlocked feature of the guard .
5) Additional safety instructions for units with bagging attachments
Switch-off the machine before attaching or removing the bag.
Safety
Advertisement
