Related Manuals for Hyundai HYBV2600X
Summary of Contents for Hyundai HYBV2600X
- Page 1 LEAF BLOWER/VACUUM/SHREDDER HYBV2600X Instruction Manual WARNING: Read the instructions carefully before use. Iss:Oct/24...
-
Page 2: Table Of Contents
Contents Introduction……..……………………………3 Technical Data…………......35 Safety Information…..…………………..4-13 Exploded Diagram and Parts………..36-38 Understand Your Machine.…..…………...4 Exploded Diagram…………………….…..36 Personal Safety...…….……………………4-5 Parts Lists………………………………….37-38 Prior to Starting………………………………5 Carbon Monoxide…………………………..6 Recycling And Disposal..………………...39 Fuel Safety……………………………………7 Fueling/De-Fueling…………………………8 Declaration Of Conformity…..…………..40 Storage……………………………………….8 Vibrations……………………………………..9 Useful Information…..……………………..41 Noise…………………………………………..9 Our YouTube Channel…..………………..41 Intended Use...……………………………..10 Warranty…………………………………….41 Symbols on the Machin………………….11... -
Page 3: Introduction
THE MACHINE. Keep for future reference and pass it on if the machine is loaned or sold to another user. This manual has been produced by Hyundai Power Products and should be kept with the product. Please read and understand these instructions before you use your product. -
Page 4: Safety Information
Safety Information Learn How To Operate Your Machine Safely The Hyundai HYBV 2600X machine is designed to clear dry leaves and light debris from gardens, paths, sports areas and hard-standings. It is not designed to collect stones or twigs. The machine can be operated in two different ways: •... -
Page 5: Prior To Starting
Safety Information Personal Protective Equipment (PPE) Continued The machine requires a combination of 40 parts unleaded petrol to 1 part semi-synthetic two stroke oil (40 1) and a calibrated can is provided. Before handling the fuel, please ensure you're in a well ventilated area with no naked flames. -
Page 6: Carbon Monoxide
Safety Information Carbon Monoxide Safety DANGER Engine exhaust fumes contain Carbon Monoxide. This is a poisonous gas and can kill in minutes. NEVER use inside a building or in an area with poor ventilation. NEVER use inside a confined space, such as but not limited to a house, garage, vehicle, boat or tent. -
Page 7: Fuel Safety
Safety Information Fuel Safety CAUTION! ALL FUELS ARE HIGHLY FLAMMABLE AND PETROL VAPOUR IS EXPLOSIVE. TAKE EXTREME CARE WHEN HANDLING FUEL. KEEP FUEL OUT OF REACH OF CHILDREN. General Safety Do not smoke each time fuel is handled. • ALWAYS avoid inhaling fumes. •... -
Page 8: Fueling/De-Fueling
Safety Information Fueling/De-Fueling • ALWAYS fuel and de-fuel in a well ventilated area outside of buildings. Use a funnel to add fuel to the fuel container – only outdoors. Do not smoke during this and each time fuel is handled. •... -
Page 9: Vibrations
Safety Information Vibrations (Where Applicable) • Prolonged use of hand held (operated) machines will cause the user to feel the effects of/from vibrations. These vibrations can lead to white finger (Raynaud’s phenomenon) or carpal tunnel syndrome. This condition reduces the ability of the hand to feel and regulate temperature, causing numbness and heat sensations and may cause nerve damage and circulatory tissue death. -
Page 10: Intended Use
Safety Information Intended Use The HYBV2600X is petrol powered leaf blower/Vacuum that is powered by a 25.4cc HYUNDAI motor. This machine is specifically a pedestrian tool, manufactured according to the latest safety requirements. Every precaution is only effective when it’s followed exactly. -
Page 11: Symbols On The Machin
Safety Information Symbols On The Machine We have provided safety messages in this manual and on the machine. This information alerts you to potential hazards that could hurt you or others. Please read these messages carefully. However, we may not have listed all of the possible hazards, you must also use your own judgement. -
Page 12: Unboxing
2. Lay the contents out and check them. If any part is damaged or missing, you must not use the machine. Contact HYUNDAI POWER PRODUCTS immediately. 3. You must keep the packaging material in case the machine needs to be returned or repaired. - Page 13 Unboxing Box Contents Mixer Bottle Main Body 2 x M6 Bolts and Nyloc Nuts with Hex Key Sparkplug Wrench and Hex Key Blower Tubes, 2 Sided Screwdriver with connecting bolt Vacuum Tubes with M5 connecting bolts. Collection Bag Elbow Tube www.hyundaipowerproducts.co.uk...
-
Page 14: Features
Features www.hyundaipowerproducts.co.uk... -
Page 15: Vacuum Configuration Assembly
Assembly Vacuum Configuration Assembly Airflow example www.hyundaipowerproducts.co.uk... - Page 16 Assembly Vacuum Configuration Assembly Insert flat blade end of screwdriver into square hole and push to release air intake cover catch and open door. With the intake cover open you can see the blades that will shred the material as it passes through the power-head.
- Page 17 Assembly Vacuum Configuration Assembly Collector tube correctly installed in power- head unit. Align moulded key-ways, push tubes to- gether, install M5 nuts and bolts (non-Nyloc) and tighten gently using Allen key. Insert widest end of tube into collector bag beyond the Velcro strap www.hyundaipowerproducts.co.uk...
- Page 18 Assembly Vacuum Configuration Assembly Fasten Velcro strap to secure pipe. Align moulded keyway with slot in pow- erhead and insert curved tube until the keyway disappears. Insert the two Nyloc M6 nuts into the loca- tions on one side of powerhead and the bolts into the other, tighten until they're just firm.
- Page 19 Assembly Vacuum Configuration Assembly Assembled unit, please note collector pipe chamfer must face the ground Please note that the machine is designed for two handed operation when in vacuum mode. Top Handle with Throttle Lower Handle Shoulder Strap www.hyundaipowerproducts.co.uk...
-
Page 20: Blower Configuration Assembly
Assembly Blower Configuration Assembly Airflow example Powerful motor turns fan which expels air down tube Air leaves tube at high velocity and blows materials forward Air is drawn into powerhead through vents www.hyundaipowerproducts.co.uk... - Page 21 Prior to assembly please ensure that the air intake cover is locked closed. Identify the first-stage blower tube by the blue Hyundai logo and the keyway at one end which fits into the powerhead. Align the keyway and push the blower tube into the powerhead.
- Page 22 Assembly Blower Configuration Assembly Secure using the M6 Nyloc nuts and bolts. The nuts fit into a hexagonal moulding with the nylon on show. Next, find the round moulding on the upper tube and push it into the elongated channel on the lower tube. Once you've pushed the lower tube home, rotate ii 90 degrees clockwise, ii will lock and align the thread, ready for the screw.
- Page 23 Assembly Blower Configuration Assembly Put a little grease on the screw and tighten it firmly. The machine is now assembled and is operated using one hand. www.hyundaipowerproducts.co.uk...
-
Page 24: Operation
Operation The Engine Fuel and fuelling. Your machine is fitted with a two-stroke combustion engine. Instead of a separate oil tank to lubricate the internal components a semi-synthetic two-stroke oil is mixed with unleaded petrol. Petrol is highly flammable and must be stored in an approved container in a safe, cool place, out of direct sunlight. -
Page 25: Starting
Operation Engine Starting the engine. Under no circumstances must the engine be started if the machine is not fully assembled for use. In a safe environment and wearing the correct personal protective equipment (PPE) press the fuel primer bulb which is located beneath the air filter with your finer until the air is expelled and neat duel is being pumped through the carburettor, you’ll hear and feel the change the air to liquid If... -
Page 26: Running Out Of Fuel
Operation Engine Running out of fuel. It's inevitable that the machine will run out of fuel from time to time. When this occurs simply re-fuel once the engine has cooled and repeat the starting procedure remembering to fill the carburettor with fuel by pressing the fuel primer bulb a few times. -
Page 27: Maintenance & Care
Maintenance & Care General Maintenance WARNING : Turn OFF the machine, allow all moving parts to come to a complete stop, and disconnect the power cord before maintaining the machine. You need to wear proper clothing and protective gloves whenever your hands are at risk. -
Page 28: Replacement Parts & Spares Info
Replacement Parts/Spares Information No Hassle Returns Same Day Dispatch* Over 10,000 Spare Parts QR Code – Scan the QR code for a direct link to our website Our Website : power-spares.co.uk Call us : 01646 404406 Email us : sales@power-spares.co.uk To maintain your machine in peak operating condition, proper maintenance and care are crucial. -
Page 29: Adjusting Idle Speed
Maintenance & Care Adjusting Idle Speed The idle speed of your engine is the speed that it rotates without you touching the throttle. If it's incorrect, you can make a simple adjustment using the screwdriver in your tool kit. Make sure the engine's reached normal operating temperature ( 2- 3 minutes). -
Page 30: Changing Sparkplug
Maintenance & Care Checking the Sparkplug The compressed air and fuel mixture in your engine is ignited by an electrical charge created by a spark plug. If your engine's performance has deteriorated you may like to check the spark plug. To do so please make sure the engine isn't hot and raise the cover to the right of the upper handle using your index finger or the flat blade of a screwdriver and lift it off. -
Page 31: Replacing The Air Filter
Maintenance & Care Replacing the fuel filter The fuel filter should be replaced annually or if no other reason can be found for a drop in the engine's performance. To replace the fuel filter unscrew the fuel tank filler cap and holding the plastic retainer between your thumb and index finger, ease the retaining piece through the filler neck and detach the assembly from the tank. -
Page 32: Replacing The Fan And Shredder
Maintenance & Care Replacing the Fan and Shredder Check the shredder blades for sharpness and the fan blades for damage or cracks. If necessary remove and replace them by firstly undoing the five screws securing the fan cover and carefully lifting it to gain access without damaging the wires, you can disconnect them if you prefer. -
Page 33: Troubleshooting
Troubleshooting Common Faults Problem Possible Causes Solution Electrode Wet Dry Electrode Clean or replace Covered with Carbon sparkplug Damaged insulation Replace Spark Plug Spark plug Adjust to 0.6 - Spark gap incorrect 0.7mm Electrode burnt Replace Spark Plug No Spark from the sparkplug Damaged HT Lead Repair or Replace... -
Page 34: Common Faults
Troubleshooting Common Faults Problem Possible Causes Solution Filter Clogged Clean Filter Tighten fuel lines to Air is able to pass through prevent air from the carburettor connection penetrating Stop the engine and let it cool down. When you Engine struggles to keep going Engine is overheating restart it, avoid long periods of heavy loads... -
Page 35: Technical Data
Technical Data Machine Specification Model HYBV2600X Displacement 25.4cc Fuel Unleaded 2-Stroke Semi-Synthetic Fuel / Oil Ratio 40:1 Carburettor Membrane Type Primer Pump Ignition CDI (Capacitor discharge) Spark Plug L7RTC Starting Method Recoil Pull Start Fuel Tank Capacity 450ml Rated Power 0.75kW@7000rpm... -
Page 36: Exploded Diagram And Parts
Technical Data Exploded Diagram www.hyundaipowerproducts.co.uk... -
Page 37: Parts Lists
Technical Data Parts List Spart Part Name Spare Part Name Spark Plug Cover Screw M5*55 Screw ST5*16 Extinguishing Line Cylinder Cover Screw M4*20 Screw M4*20 Ignition Bakelite Gasket Starter 4*10*4 Knob Cylinder Gasket Air Filter Cover Piston ring Air Filter Sponge Piston Screw M5*55 Piston Pin 8*28.2... - Page 38 Technical Data Parts List Spare Part Name Spare Part Name Throttle Line Screw M8*1 Throttle Trigger Left Hood Extinguishing switch strip type welding Screw ST5*16 wire with dust cover Micro Switch paralell screw ST%*14 welding wire Self-Locking switch protective switch bushing protective switch Left Handle...
-
Page 39: Recycling And Disposal
Recycling & Disposal Recycling & Disposal We do not offer a takeback scheme for the recovery of Waste Electrical Electronic Equipment (WEEE) & Batteries. Instead the responsibility to dispose of WEEE and/or Batteries is passed onto you by us. So when it becomes necessary to dispose of your machine you must take it to your local Civic Amenity Site. -
Page 40: Declaration Of Conformity
Isaac Way, Pembroke Dock, SA72 4RW Country of Origin: China Description: Leaf Blower, Vacuum & Shredder SKU Code: HYBV2600X Date of Issue: 22/07/2021 Regulations and Directives of Compliance • 2006/42/EC The Machine Directive • 2014/30/EU EMC Directive • 2011/65/EU RoHS •... -
Page 41: Useful Information
Go to YouTube and search ‘Hyundai Power Products’. Warranty Proof of purchase will be required before you make a warranty claim. Full warranty terms and conditions can be found on the HYUNDAI POWER PRODUCTS website: www.hyundaipowerproducts.co.uk Manual Updates Our manuals are constantly being reviewed and updated. Should you find an error, omission or something unclear, please contact us for assistance. -
Page 42: Product Record
Product Record Information As soon as you have purchased the machine, we recommend that you fill out the following. If you need to contact an authorised dealer or customer service for information on servicing, you may need to provide the following information. Date Of Purchase:……………………………………………………………………………….. -
Page 43: Contact Us
Our friendly aftersales team will be more than happy to help you. Phone Call our team on 01646 687 880 Email aftersales@hyundaipowerproducts.co.uk Online Live Chat Go to www.hyundaipowerproducts.co.uk Post Genpower Ltd, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW. Hyundai Support Website Go to hyundaisupport.co.uk www.hyundaipowerproducts.co.uk... - Page 44 For Inquiries, Please Contact: GENPOWER LTD Isaac Way, London Road, Pembroke Dock, UK, SA72 4RW. T: +44 (0) 1646 687 880 E: info@hyundaipowerproducts.co.uk www.hyundaipowerproducts.co.uk Imported / Distributed by Genpower Ltd for Licensed by Hyundai Corporation Holdings, Korea the United Kingdom & Ireland...
Need help?
Do you have a question about the HYBV2600X and is the answer not in the manual?
Questions and answers