Additional Information - Dyson pure cool DP04 Operating Manual

Additional information

CONTROL WITHOUT THE REMOTE
• The appliance can be controlled through your Dyson Link app.
DYSON LINK APP CONNECTIVITY
• You must have a live internet connection in order for the Dyson Link app to work.
• The appliance can connect to either 2.4GHz or 5GHz networks which includes most
modern routers. Check your router documentation for compatibility.
• The Dyson Link app requires an iOS device with at least iOS version 10* or an Android
device with at least Android version 5.
• Your mobile device must have Bluetooth 4.0 support (Bluetooth Low Energy) in order to set
up a connection with the appliance. Check your device specification for compatibility.
– BLE/Wi-Fi 2.4GHz – 2.5GHz, 0.1W max
– Wi-Fi 5.170GHz – 5.835GHz, 0.1W max
– Supported Wi-Fi protocols:
– IEEE802.11a
– IEEE802.11b (Not recommended)
– IEEE802.11g
– IEEE802.11n
– Networked standby: 1.0 W
REPLACEABLE PARTS
BATTERY REPLACEMENT
CAUTION
Unscrew the battery compartment on the remote control. Loosen the base and pull to
remove the battery.
• Do not install backwards or short circuit the batteries.
• Do not attempt to dismantle or charge the batteries. Keep away from fire.
• Follow battery manufacturers' instructions when installing new batteries (battery type
CR 2032).
• Always replace the screw in the remote control.
• WARNING: Chemical Burn and Choking Hazard. Keep batteries away from children. This
product contains a lithium button/coin cell battery. If a new or used lithium button/coin
cell battery is swallowed or enters the body, it can cause severe internal burns and can
lead to death in as little as 2 hours. Always completely secure the battery compartment.
26
If the battery compartment does not close securely, stop using the product, remove
the batteries, and keep it away from children. If you think batteries might have been
swallowed or placed inside any part of the body, seek immediate medical attention.
NON-WASHABLE FILTER UNITS
• Your filter units are non-washable and non-recyclable.
• To replace your filter units follow the steps as shown.
• Failure to replace the filter units when prompted may result in changes to product
performance and appearance.
• New filter units can be purchased at www.dyson.in/support.
AUTO MODE
• A period of 6 days is required after the appliance is first used for the sensor to calibrate.
During this period the appliance may be more sensitive to VOCs (such as odours)
than normal.
DISPOSAL INFORMATION
• Dyson products are made from high grade recyclable materials. Recycle where possible.
• Dispose of or recycle the battery in accordance with local ordinances or regulations.
• Keep the used batteries away from children as these can still harm children if swallowed.
• Your filter units are non-washable and non-recyclable.
• Dispose of the exhausted filter units in accordance with local ordinances or regulations.
• The battery should be removed from the product before disposal.
DYSON CUSTOMER CARE
THANK YOU FOR CHOOSING TO BUY A DYSON APPLIANCE.
After registering your 2 year warranty, your Dyson appliance will be covered for parts and
labour for 2 years from the date of purchase, subject to the terms of the warranty. If you
have any queries regarding your Dyson appliance, visit www.dyson.in/support for online
help, general tips and useful information about Dyson.
Alternatively, you can call the Dyson Helpline with your serial number, and details of
where and when you bought the appliance.
Your serial number can be found on your rating plate which is on the base of
the appliance.
If your Dyson appliance needs a service, call the Dyson Helpline so we can discuss the
available options. If your Dyson appliance is under warranty, and the repair is covered,
it will be repaired at no cost.