Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Dyson pure hot + cool link
Summary of Contents for Dyson pure hot + cool link
-
Page 1: Operating Manual
Setting up Dyson Link app 1. Download the Dyson Link app, 2. Select ‘Add a Product’ from 3. Input the above information available on iOS and Android. within the app and follow when requested to do so. the on screen instructions. - Page 2 Thank you for choosing to buy a Dyson appliance After registering your free 2 year guarantee, your Dyson appliance will be covered for parts and labour (excluding filters) for 2 years from the date of purchase, subject to the terms of the guarantee. If you have any questions...
-
Page 3: Important Safety Instructions
3. Use only as described in this Dyson Operating Manual. Do not carry out any maintenance other than that shown in this manual, or advised by the Dyson Helpline. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. - Page 4 Dyson Helpline. 26. Contact the Dyson Helpline when service or repair is required. Do not disassemble the appliance as incorrect reassembly may result in an electric shock or fire.
- Page 5 Setting up Dyson Link app The appliance can be enhanced when connected to the Dyson Link app on your smart device. Product SSID XXXXX-XXX-XX-XXXXXXXX-XXXX Product Wi-Fi Password XXXXXXXX Mac address X X:X X:X X:X X:X X:X X Download the Dyson Link app, Select ‘Add a Product’...
- Page 6 Heating and cooling modes Appliance is in cooling mode Press the blue cooling mode button to enter cooling mode. On first use, the appliance will default to a temperature 3°C The power button light will change from red to blue to higher than the detected room temperature.
- Page 7 For additional control the Dyson Link app can be used to further adjust the sensitivity of the appliance. A period of 6 days is required after the machine is first used for the sensor to calibrate. During this period the machine...
- Page 8 Night mode The night mode will dim the display and run quietly, making it ideal for use while sleeping. When night mode is enabled (indicated by an illuminated half moon symbol in the bottom right corner of the display), the display will dim and after 5 seconds will fade to off. 5 secs The half moon symbol remains illuminated.
- Page 9 Sleep timer Tilt function The sleep timer will turn your appliance off once the time set has passed. To set the sleep timer, select the desired time. When time reaches zero, the appliance will go into standby mode. Carefully hold the base and the main body. Tilt the amplifier To cancel, increase the time until two dashes appear.
- Page 10 If the appliance has been in use, leave for 1 to 2 hours before replacing the filter unit to allow the appliance to cool down completely. Your Dyson appliance is programmed to remind you to replace the filter unit after 12 months based on 12 hours usage a day.
- Page 11 6 seconds on the remote control to reset the filter indicator. 6 sec The Dyson Link app will notify you when your non-washable filter needs to be replaced. The filter indicator can also be reset from within the Dyson Link app.
- Page 12 If you clear your network settings the appliance will not connect to the Dyson Link app. Troubleshooting If you see a flashing ‘E’ when trying If you see a solid ‘E’ when trying to use...
- Page 13 • Do not lubricate any part of this appliance. to the terms of the guarantee. If you have any questions about your Dyson appliance, call the Dyson Helpline with your serial number and details of where/ when you bought the appliance.
- Page 14 When you register, you will have the opportunity to choose whether you would like to receive communications from us. If you opt-in to communications from Dyson, we will send you details of special offers and news of our latest innovations. We never sell your information to third parties and only use information that you share with us as defined by our privacy policies which are available on our website.
- Page 16 Telephone Mobile As a Dyson purifier owner, you can hear about Dyson We sometimes ask other companies (such as market researchers) to inventions, services and products before anyone else. contact owners on our behalf. We do this to get feedback on ideas or If it’s okay to contact you, please let us know how we...