LG AS60GD Series Owner's Manual page 32

Symptoms
The particles
concentration levels
are different between
the appliance and the
LG SmartThinQ app.
Performance
Symptoms
The indoor air is not
purified well enough.
Noise
Symptoms
Fan is noisy even on
the lowest speed.
The appliance makes
a sudden loud noise
while operating.
A noise is generated
when I start or stop the
clean booster.
32
Are you looking at the same particles?
• Make sure that the levels of the PM1.0/PM2.5/PM10 are displayed
consistently between the LG SmartThinQ app and your appliance.
• The difference in the values could be caused by the difference in updated
time between the LG SmartThinQ app and the appliance.
Is the indoor contamination severe?
• Ventilate the indoor air before you use the product.
Did dust accumulate in the ultra-fine filter?
• Clean the ultra-fine filter properly.
Did dust accumulate in the allergen collection care filter?
• Replace the filter.
Are you using it in a place that is too spacious or too open?
• Use a product that fits the size of the room.
• Avoid a well-ventilated place such as a gate, window, etc.
Is there any obstacle nearby?
• Remove the obstacle.
Is the appliance installed at a corner?
• Move the appliance and install it again.
Did dust accumulate in the ultra-fine filter?
• Clean the ultra-fine filter properly.
Did dust accumulate in the allergen collection care filter?
• Replace the whole filter.
Is the operation mode set to Smart mode or Speed is set to Auto mode?
• It may make a sudden noise as it automatically adjusts the air flow
depending on indoor air quality.
• It means that the clean booster is trying to look for the correct location.
Possible Causes & Solution
Possible Causes & Solution
Possible Causes & Solution
EN