Saxby Lighting ALBA Instruction Manual

Sensor Parameters
Solar Panel: monocrystalline 1.8W
Battery: Li-ion 18650 3.7V 2600mAh
Charge time: 7-8 hours
Detection range: 8±2m
Detection angle: 110º
Technical data
Bulb
4.4W LED module (SMD), 4000K
Type:
The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole
luminaire shall be replaced.
Conformity with all relevant EC Directive requirements.
This product is Class 3.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or local store for recycling advice.
This product is rated at IP44.
44
IP
This product is rated at IK05.
05
IK
Care and Safety
We recommend cleaning with a soft dry cloth. Do not use solvents or abrasive cleaners as these could damage the finish.
For your safety, always switch off the power supply before changing lightbulbs, or cleaning.
This LED's are protected by a PC shade. The shade part must be replaced immediately should it
become cracked or damaged. This fitting must not be used without the PC shade in place.
Replace Cracked Shade
V1 16/01/2020
Saxby Lighting. BH17 7BY
Instruction manual
ALBA SOLAR WALL PIR
92529
www.saxbylighting.com