Tools Required - Schwinn Cadence Pro Install Manual
Core health & fitness for sc
Hide thumbs
Also See for Cadence Pro:
- Installation instructions manual (28 pages) ,
- Assembly manual (12 pages)
Advertisement
SC5 + SC7
Tools Required:
•
3mm Allen Key
•
#2 Phillips Screwdriver
1.
Install the silicone seal onto the back of the Ca-
dence Pro computer. Ensure that the holes in the
seal line up with the screw holes of the computer.
2.
Use a #3mm allen key to secure the back plate of
the mount to the computer using three (3) M5 x
10mm screws.
3.
Use a 3mm allen key to secure the computer to
the handlebars using four (4) M5 x 10mm screws.
NOTE: While the image right shows an SC5, the com-
puter mounts to the SC7 in the same way.
Page 4
Advertisement
