Schwinn Cadence Pro Install Manual page 2

Pair Sensor + Computer
1. Begin with one battery removed from the com-
puter.
2. Insert the battery while pressing and holding any
of the four buttons on the front of the comput-
er. The display will now show the maintenance
screen.
3. Press the Set button (
displayed in the middle readout and "E01" in the
top readout.
4. Press the Set button (
CAD in the middle display, 0 in the top RPM dis-
play and 0000 in the bottom display.
NOTE: While the bottom display may already show the
pairing code, this procedure should still be completed
) and"CAD" should be
) again, which will show
Page 1