Schwinn Cadence Pro Install Manual page 3

5. To pair automatically, press the Mode button(
The 4-digit alpha-numeric code should match the
code on the side of the cadence transmitter and
the back of the computer
6. If needed, a manual pairing can be done by press-
ing and holding the Mode button (
digits of the 4 digit code (0000) should be fl ashing.
Adjust the digit using the up (
( ) button.
7. Press the Set button (
been paired to the transmitter.
8. Press the Set button (
kilometers (KM) or miles by using the up (
or down ( ) button
)
). The fi rst
) or down
) after each digit has
) and select distance in
)
Page 2