Schwinn Cadence Pro Install Manual page 4

9. Press the Set button (
exercise.
NOTE: Once the pairing has been completed, the code
is stored in the on-board memory so that the code is
retained during a battery change, avoiding the need to
re-pair.
Setting Gear Ratio
1. Begin with one battery removed from the com-
puter.
2. Insert the battery while pressing and holding any
of the four buttons on the front of the comput-
er. The display will now show the maintenance
screen.
3. Press the Set button (
tio" should be displayed in the middle readout.
The currently selected gear ratio should be blink-
ing in the lower readout.
4. Use up ( ) or down (
1:3.2 gear ratio then press Set (
selection.
5. After pairing AND setting the gear ratio, install
the 3rd battery and reinstall the battery cover.
) to fi nish and begin
) three times and "GrA-
) to select the
) to confi rm
Page 3