Advertisement
Page #
2
Pre-assembly Check List
3
925 Parts List
4-6
925 ADJ MOTOR BENCH Assembly Drawing
4-6
925 ADJ MOTOR Adjustable Bench Instructions
7-8
ESD Grounding
8
Cleaning
IAC Industries takes great care in the packing of its products; however damage can occur during
shipment. Check all packages and parts for any signs of damage. If damage is evident STOP and
contact the carrier that delivered your order. Request a freight claim inspector to document the
damage and begin the freight claim process.
Tools required to assemble your products are:
7/16" and 1/2" wrench or socket with ratchet. Phillips screwdriver 8" long.
Utility knife. Safety glasses and light duty protective gloves.
Power tools are NOT recommended unless they are equipped with a torque-limiting device which
can limit the torque to 10-foot lbs. maximum.
Unpack your order and separate like parts. Be careful not to damage parts as they are being moved
into position. Also be sure all parts are removed from the packing materials before these materials
are thrown away.
Locate the hardware kits and keep them in a central area. If the assembly is going to take more than
one day, all individual hardware pieces should be returned to a central location.
Check all parts and hardware kits against the itemized packing list found with the assembly
instructions. If you believe there are parts missing from your order please contact IAC Industries
customer service at 800-989-1422.
WARNING:
ALL PARTICLE BOARD USED IN IAC INDUSTRIES PRODUCTS ARE SOURCED ONLY FROM VENDORS THAT ARE CARB
ATCM PHASE 2 AND TSCA TITLE VI COMPLIANT WITH VALID CERTIFICATES
products can expose you to wood dust, a substance known to the state of California to cause cancer. Avoid inhaling dust generated from wood
products or use a dust mask to other safeguards for personal protection. This product can expose you to chemicals, including formaldehyde, which
is known to the state of California to cause cancer, and methanol, which is known to the state of California to cause birth defects or other
reproductive harm. For more information please visit, www.P65WARNINGS.CA.GOV/WOOD.
REQUEST.
Table of Contents
ATTENTION NOTES:
2
.
Drilling, Sawing, Sanding or Machining Wood
COPY OF VENDOR CERTIFICATE AVAILABLE UPON
Advertisement
