Advertisement
WARNING:
ALL PARTICLE BOARD USED IN IAC INDUSTRIES PRODUCTS ARE SOURCED ONLY FROM VENDORS THAT
ARE CARB ATCM PHASE 2 AND TSCA TITLE VI COMPLIANT WITH VALID CERTIFICATES
or Machining Wood products can expose you to wood dust, a substance known to the state of California to cause cancer. Avoid inhaling
dust generated from wood products or use a dust mask to other safeguards for personal protection. This product can expose you to
chemicals, including formaldehyde, which is known to the state of California to cause cancer, and methanol, which is known to the state
of California to cause birth defects or other reproductive harm. For more information please visit, www.P65WARNINGS.CA.GOV/WOOD.
COPY OF VENDOR CERTIFICATE AVAILABLE UPON REQUEST.
PRE ASSEMBLY CHECK LIST
Your bench has been carefully packed at the factory to prevent damage during shipment. Unpack all parts
and examine them for damage. Contact your freight carrier for freight claims information if your order was
shipped "freight collect" or "pre-pay and add". Contact IAC Industries at 800 989-1422 if parts are missing.
HARDWARE KIT QS-HWR4021:
BRKT, VL Shelf 10.25L RT
Washer ¼ Flat Black
HARDWARE KIT COMPONENTS:
Description
BRKT,VL SHELF 10.25L RT
BRKT,VL SHELF 10.25L LT
BOLT 1/4-20 X .75 HHW BLK
WASHER 1/4 FLAT BLK
NUT UNISTRUT 1/4-20 SHORT SPRING
TOOLS NEEDED:
Power or hand held Phillips head screwdriver with #2 tip, 7/16" and 1/2" combination
wrench or thin wall sockets.
BRKT, VL Shelf 10.25L LT
Nut, Unistrut ¼-20 Short Spring
Qty
1
1
4
4
4
3
.
Drilling, Sawing, Sanding
Bolt, ¼-20 X .75 HHW BLK
Advertisement
