5 Configuration and Settings
5.1 Configuring SIMATIC Panel TP700 Comfort
Configuration and Settings
5
5.1
Configuring SIMATIC Panel TP700 Comfort
Table 5-1
No.
1.
Provide the TP700 Comfort with 24V.
Click the "Settings" button in the start center
2.
after the initialization phase of Windows CE
Double-click the transfer icon in the "Control
3.
Panel" settings.
Select the "PN/IE" transmission channel in
4.
"Transfer Settings".
Then click the "Properties..." button.
You will then get to "Network and Dial-up
5.
Connections".
Double click the PN_X1 icon.
2
The "bootloader" initialization phase is followed by a startup delay interval after which an already loaded application
starts. You therefore have to click an action in the loader within the startup delay time.
Weighing, Controlling and Logging (Set 6)
Entry ID: 82454336,
V2.0,
Action
10/2017
Comment
2
.
35