Advertisement
Available languages
Available languages
Use masonry bits when drilling in soft masonry.
u
Use a lubricant when drilling metals other than cast iron
u
and brass.
Make an indentation using a centre punch at the centre of
u
the hole to be drilled in order to improve accuracy.
Screwdriving
Always use the correct type and size of screwdriver bit.
u
If screws are difficult to tighten, try applying a small
u
amount of washing liquid or soap as a lubricant.
Always hold the tool and screwdriver bit in a straight line
u
with the screw.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool using
u
a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior (when fitted).
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com.
(Original instructions)
Technical data
Voltage
V
DC
-1
No-Load Speed
min
Max. torque
Nm
Chuck capacity
mm
Max Drilling capacity
Steel/wood/masonry
mm
Charger
Input Voltage
V
AC
Output Voltage
V
DC
Current
A
Approx. charge time
h
Battery
BL1114
Voltage
14.4
V
DC
Capacity
Ah
1.1
Type
Li-Ion
Battery
BL1318
Voltage
18
V
DC
Capacity
Ah
1.1
Type
Li-Ion
Level of sound pressure according to EN 60745:
Sound pressure (L
) 87.4 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L
) 98.4 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 60745:
Impact drilling into concrete (a
) < 11 m/s
h, ID
2
Drilling into metal (a
) < 2.5 m/s
h, D
Screwdriving without impact (a
) < 2.5 m/s
h, S
ENGLISH
BDK188 (H1)
18
0-400/0-1350
17/38
10
10/25/10
905998** (typ. 1)
230
18
1
1.5
BL1314
BL1514
14.4
14.4
1.3
1.5
Li-Ion
Li-Ion
BL1518
BL2018
v
18
1.3
2.0
Li-Ion
Li-Ion
2
2
, uncertainty (K) 1.5 m/s
2
, uncertainty (K) 1.5 m/s
2
2
, uncertainty (K) 1.5 m/s
7
Advertisement
