Table of Contents
Advertisement
714C
Users Manual
Simulate Thermocouples
Connect the Product TC input/output to the instrument
under test with thermocouple wire and the appropriate
thermocouple mini-connector (polarized thermocouple
plug with flat, in-line blades spaced 7.9 mm [0.312 in]
center to center).
One pin is wider than the other. Do not try to
force a miniplug in the wrong polarization. Figure
8 shows this connection.
20
Note
Proceed as follows to simulate a thermocouple:
1.
Attach the thermocouple leads to the appropriate TC
miniplug, then to the TC input/output as shown in
Figure 8.
2.
If necessary, push
3.
Push
for the TC display. If desired, continue
pushing this key to select the desired thermocouple
type or mV.
4.
Enter the value you want by pushing
Push
and
to select a different digit to edit.
for Source mode.
and
.
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
