Set Unlock Pattern - HIKVISION DS-7100NI-K1/W/M Series Quick Start Manual

Client Software.
Steps
1. Enter the password in Create New Password and Confirm New Password.
Warning
We highly recommend you create a strong password of your own choosing (Using a minimum of
8 characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your product. And
we recommend you reset your password regularly, especially in the high security system,
resetting the password monthly or weekly can better protect your product.
2. Check Use Device Password to Active IP Camera, or enter the password in IP Camera
Activation to activate the IP camera(s) connected to the device.
3. Set Area/Country.
4. Click OK.
What to do next
Export the GUID file to the USB flash driver for the future password resetting.

3.3 Set Unlock Pattern

For the admin user, you can set the unlock pattern for device login after it is activated.
Steps
1. Use mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the
pattern is done.
Figure 3-2 Set Admin Password