1. Manuals
  2. Brands
  3. BETCO Manuals
  4. Floor Machine
  5. CRETE Rx CP30
  6. Operator and parts manual

BETCO CRETE Rx CP30 Operator And Parts Manual

30" concrete and terrazzo polishing machine
Hide thumbs Also See for CRETE Rx CP30:
Table of Contents

Advertisement

Quick Links

Download this manual
Electronic Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this docu-
ment. Should you have detailed questions pertaining to the information
contained in this document, you may contact Michco, or the manufac-
turer which provided the original information in this electronic deliver-
able. Michco's only part in this electronic deliverable was the electronic
assembly process. By providing this manual on line we are not guaran-
teeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServe@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email:
Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer's reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CRETE Rx CP30 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BETCO CRETE Rx CP30

Summary of Contents for BETCO CRETE Rx CP30

  • Page 1 Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this docu- ment. Should you have detailed questions pertaining to the information contained in this document, you may contact Michco, or the manufac- turer which provided the original information in this electronic deliver- able.
  • Page 2 E29800-00 30" Concrete and Terrazzo Polishing Machine Operator and Parts Manual 400 Van Camp • Bowling Green, Ohio 43402 Customer Service: 888-GO-BETCO • Fax: 800-445-5056 • Technical Service: 877-856-5954 • www.betco.com...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS RECEIVING THE MACHINE..........3 CARBON MONOXIDE WARNING ........4 SAFETY ...............5 - 6 TANK USE AND STORAGE ..........6 UNPACKING THE MACHINE ..........7 ENGINE PREPARATION AND OPERATION ....8 - 9 MACHINE AND WORK AREA PREPARATIONS ....10 TOOL DRIVE PLATE INSTALLATION ......

  • Page 4: Receiving The Machine

    Only use this machine for its intended purpose. Please keep the machine in good working order by performing routine maintenance. Read this instruction manual and refer back to it when machine questions arise. The BETCO technical customer service representatives should be contacted with machine questions not answered by this manual.

  • Page 5: Carbon Monoxide Warning

    WARNING - CARBON MONOXIDE LETHAL EXHAUST GAS - MUST READ THIS! - Never Run The Engine In A Closed Building Or Confined Area Exhaust gases contain poisonous carbon monoxide. Carbon monoxide is odorless, colorless, and can cause death if inhaled. Carbon Monoxide Poisoning Symptoms Train your employees to know the warning signs of carbon monoxide poisoning.

  • Page 6: Safety

    • When replacing parts, use only ORIGINAL replacement parts from your Authorized BETCO Dealer. • If the machine is not working properly, have it serviced by a BETCO authorized service center. • Have your BETCO service center perform routine maintenance on the machine once a year.

  • Page 7: Tank Use And Storage

    • Never remove guards that require tools to remove. • When your BETCO machine is ready to be disposed of, the machine must be disposed of properly. It contains oils and electronic components. The machine itself was built using totally recyclable materials.

  • Page 8: Unpacking The Machine

    UNPACKING THE MACHINE This machine arrives securely fastened to a reinforced pallet and must be removed in the following fashion to ensure no damage occurs to the machine, property or personnel. It is vital that this machine and pallet be placed on a level surface prior to unpacking the machine. Remove the ratchet straps securing the front of the machines deck to the pallet.

  • Page 9: Engine Preparation And Operation

    ENGINE PREPARATION AND OPERATION IMPORTANT NOTES: 1. Before performing any maintenance, turn off the engine and disconnect the fuel tank and battery. 2. Change engine oil and oil filter after first 8 hours of operation. 3. Maintenance should be done by qualified personnel only. 4.
  • Page 10 ENGINE PREPARATION AND OPERATION (continued) Installing the Propane Cylinder 1. Take machine to a well ventilated area. 2. Check cylinder for overfill. 3. Place cylinder on the machine in tank holding area and secure strap. 4. Attach the propane hose coupling and fully tighten. 5.

  • Page 11: Machine And Work Area Preparations

    MACHINE AND WORK AREA PREPARATIONS Caution: Before performing any maintenance or machine preparation, turn off the engine and disconnect the fuel tank and battery. If using the solution tank to dispense liquid on the floor, fill the tank with the desired chemical to be used. Perform all engine and machine checks and maintenance as needed.

  • Page 12: Tool Drive Plate Installation

    TOOL DRIVE PLATE INSTALLATION Betco Crete Rx Honing & Polishing Tool Installation The drive plates provided with this machine are specifically designed for the BETCO Crete Rx Concrete Floor ® ™ System. These instructions are based on the use of this system.

  • Page 13: Machine Operations

    5. Progress through the work area at 30 ft/min using the BETCO Crete Rx Polishing Tool. Note: The Betco Crete Rx Polishing step is performed dry with no solution on the work area. 6. Ensure to overlap each pass by at least 1/3 of the deck’s width.

  • Page 14: Troubleshooting

    TROUBLESHOOTING PROBLEM CAUSE POSSIBLE SOLUTION Recharge battery or replace Battery is dead if necessary Loose wire or bad connection Check wires and connections Engine will not turn over Bad electrical component Replace bad component Refer to engine owner’s manual Fuel system problem and read IMPORTANT below Propane tank shut off valve in Open propane tank shut off...

  • Page 15: Floating Head Deck Assembly

    FLOATING HEAD DECK ASSEMBLY E13015 E13128 E13039 E13173 E10135 E13038 E13159 E13037 E13013 E13114 E13174 E13009 E13006 E13012 E13014 E13021 E13053 E13160 E81713 E13002 E13036 E13104 E10135 E13016 E13135 E81062 E13155 E13138 E13085 E10135 E13037 E13149 E13163 E13032 E13164 E13026 E13020 E13000 E13026...
  • Page 16 FLOATING HEAD DECK ASSEMBLY PARTS LISTING Part# Description Qty. Part# Description Qty. E10135 Washer, Flat, 3/8" E13034 Washer, Flat, 1" SAE E13000 Frame, Engine Platform E13035 Nut, Hex, 1"-14, Slotted E13001 Bracket, Transport Arm E13036 Screw, Hex Cap, 3/8"-16 x 1-1/4" E13002 Handle Assembly E13037...

  • Page 17: Idler Assembly

    IDLER ASSEMBLY E13043 E13025 E88673 E13040 E13041 E13042 E10135 E13037...
  • Page 18 IDLER ASSEMBLY PARTS LISTING Part# Description Qty. Part# Description Qty. E10135 Washer, Flat, 3/8" E13041 Bushing, Shoulder, 3/4" E13025 Screw, Hex Cap, 3/8"-16 x 1" E13042 Pulley, Idler E13037 Nut, Nyloc, 3/8"-16 E13043 Screw, Hex Cap, 3/8"-16 x 2-1/2" E13040 Arm, Tensioner E88673 Washer, Fender, 3/8"...

  • Page 19: Solution System

    SOLUTION SYSTEM E13050 E13049 E13055 E13052 E13054 E13053 E13052 DECAL ADDITIONAL HOSE CLAMPS E13161 (x3) REQUIRED E13044 E13161 E13048 E13045 E13130 E13047 E13046 E13174 E13173 E10135 E13018 E13055 E13162 E13161 E13139 E13051 E13037 E10135 E13036 E10135...
  • Page 20 SOLUTION SYSTEM PARTS LISTING Part# Description Qty. Part# Description Qty. E10135 Washer, Flat, 3/8" E13051 Bracket, Solution Tank E13018 Washer, Split Lock, 3/8" E13052 Fitting, Male Thread, 1/2" Barb E13036 Screw, Hex Cap, 3/8"-16 x 1-1/4" E13053 Decal E13037 Nut, Nyloc, 3/8"-16 E13054 Valve, Ball, 1/2"...

  • Page 21: Gear Box Assembly

    GEAR BOX ASSEMBLY E13056 E13057 E13058 E13157 E13028 E13026 E13140 E13140 E13061 E13141 E13063 E13064 E13146 E12407 E13067 E13066 E13149 E13070 E13069 E13081 E13165 E13037 E13064 E13025 E13133 E10135 E13073 E13143...
  • Page 22 GEAR BOX ASSEMBLY PARTS LISTING Part# Description Qty. Part# Description Qty. E10135 Washer, Flat, 3/8" E13067 Morflex 602 E12407 Washer, Flat, 1/2" USS E13069 Cover, Bolt, Drive Plate E13025 Screw, Hex Cap, 3/8"-16 x 1" E13070 Plate, Drive, 13" E13026 Washer, Flat, 5/8"...

  • Page 23: Engine Power System

    ENGINE POWER SYSTEM E13086 E13082 E81062 E13075 E13168 E13083 E13169 E88550 E13170 E13088 E13171 E13080 E81062 E13084 E13137 E13175 E13085 E13077 E13087 E13148 E13078 E13076 E13089 E13086 E81062 E13084...
  • Page 24 ENGINE POWER SYSTEM PARTS LISTING Part# Description Qty. Part# Description Qty. E13075 Engine, 22HP, Complete E13088 Centrifugal Clutch E13076 Clamp, Muffler E13089 Spacer, Muffler, Aluminum E13077 Muffler, 22HP E13137 Washer, Clutch E13078 Manifold, Vertical E13148 Screw, Hex Head, 7/16"-20 x 1-1/4" E13080 Spacer, Clutch E13168...

  • Page 25: Engine And Carburetor

    ENGINE AND CARBURETOR E13103 E13107 E13108 E13102 E13105 E13106 E13090 E13101 E13127 E13091 E13136 E13096 E13100 E13098 E13092 E13126 E13176 E13177 E13094 E13099 E13092 E13095 E13093 E13093 E13097 E13093...
  • Page 26 ENGINE AND CARBURETOR PARTS LISTING Part# Description Qty. Part# Description Qty. E13090 Support, Recoil Cage E13102 Support, Bonnet Filter E13091 Hose, Vacuum, 39" E13103 Filter, Foam Recoil E13092 Gasket, Insulator E13105 Spark Plug, BPR4EY E13093 Gasket, Air Cleaner E13106 Filter, Oil E13094 Insulator, w/ Vacuum Tube Port E13107...

  • Page 27: Emission Shut Down

    EMISSION SHUT DOWN E13154 E13109 E13110...
  • Page 28 EMISSION SHUT DOWN PARTS LISTING Part# Description Qty. Part# Description Qty. E13109 Emission Warning, (Just Box) E13154 Screw, Phillips Head, 6-32 x 5/8" E13110 Oxygen Sensor (Only) E13111 Emission Shut Down, Complete...

  • Page 29: Solution Switch

    SOLUTION SWITCH E13128 E13129...
  • Page 30 SOLUTION SWITCH PARTS LISTING Part# Description Qty. Part# Description Qty. E13128 Switch, Solution On/Off, (Switch Only) E13129 Cable, Coiled...

  • Page 31: Engine Shut Down Switch

    ENGINE SHUT DOWN SWITCH E13114 E13129...
  • Page 32 ENGINE SHUT DOWN SWITCH PARTS LISTING Part# Description Qty. Part# Description Qty. E13114 Switch, Engine Shut down, (Switch Only) E13129 Cable, Coiled...

  • Page 33: Fuel Regulation

    FUEL REGULATION E13119 E13121 E13091 E13122 E13098 E13120 E13123 E13124...
  • Page 34 FUEL REGULATION PARTS LISTING Part# Description Qty. Part# Description Qty. E13091 Hose, Vacuum, 39" E13121 Fitting, Elbow, 3/16" Male Thread, 1/8"" Barb E13098 Hose, Fuel, 40" E13122 Fitting, Elbow, 3/8" Male Thread, 3/8" Barb E13119 Regulator, 22HP E13123 Hose, LP Tank to Regulator E13120 Fuel Lock with Filter E13124...

  • Page 35: Engine Shutdown Wiring

    ENGINE SHUT DOWN WIRING GROUND LOCATION GROUND WIRE (GREEN) STARTER IGNITION COIL WIRE (BLACK) LEGEND: BLK = BLACK CONNECTOR ENGINE SHUT DOWN SWITCH WIRE PUR = PURPLE (PURPLE) GRN= GREEN = CONNECTOR WIRING HARNESS P/N: E13129 ENGINE SHUT DOWN SWITCH P/N: E13114 IGNITION COIL...

  • Page 36: Electrical Wiring Diagram

    ELECTRICAL WIRING DIAGRAM SOLUTION KEY SWITCH SWITCH TERMINALS P/N: E13128 KEY SWITCH TACHOMETER P/N: E13012 HOUR METER P/N: E13039 FUEL LOCK OFF P/N: E13120 12 VOLT BATTERY STARTER EMISSION SHUT DOWN P/N: E13109 SPARK PLUG LEAD REFER TO ROBIN OXYGEN OWNERS MANUAL FOR SENSOR IGNITION AND CHARGING...

  • Page 37: Emissions Warranty

    Betco Corporation cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the SORE owner you should however be aware that Betco Corporation may deny your warranty if your SORE or its part has failed due to abuse, neglect, improper maintenance or unapproved modification.

  • Page 38: Warranty

    If the part fails before the first scheduled replacement, the part will be repaired or replaced by Betco Corporation according to subsection (4) below. Any such part repaired or replaced under warranty will be warranted for the remainder of the period prior to the first scheduled replacement point for the part.
  • Page 41 Service Distributor. If the original part is returned within the warranty policy period from date of delivery for inspection by Betco and is found to be defective the owner will be credited for the cost of replacement parts plus shipping and handling.

Table of Contents