Table of Contents
Advertisement
860532050
Instruction Sheet
Quantity
Description
Cordage preparation tool
1
Magnifying glass
1
Yarn shears
1
Fine tip marker
1
QWIK MPO termination instruction sheet
1
Separately Orderable Items
Note: Splicer Kit is not offered by CommScope and must be obtained through Sumitomo or other authorized
sources.
1
Sumitomo Mass Fusion Splicer Type-Q-101-M12 kit
(Recommended) or
Sumitomo Mass Fusion Splicer Type-66-M12 TuffCat kit
Parts List –Splicer Kit includes:
Quantity
1
Q-101-M12 or Type-66 Mass Fusion Splicer
1
Ribbon fiber cleaver
1
Heated ribbon stripper
2
Ribbon 12-fiber holder (left and right side)
1
Power cord
Other Tools/Supplies Required (obtain locally)
Wire stripper
Tape measure
Lint-free wipes
How to Contact Us
To find out more about CommScope
For technical assistance:
-
Within the United States, contact your local account representative or technical support at
1-800-344-0223. Outside the United States, contact your local account representative or
PartnerPRO
-
Within the United States, report any missing/damaged parts or any other issues to CommScope
Customer Claims at 1-866-539-2795 or email to claims@commscope.com. Outside the United
States, contact your local account representative or PartnerPRO Network Partner.
Important Safety Cautions
Wear safety glasses to protect your eyes when handling optical fiber.
Never look into the end of a microscope or optical cable connected to an optical output device that is
operating. Laser radiation is invisible, and direct exposure can severely injure the human eye.
Alcohol is flammable, causes irritation, and is harmful if swallowed or inhaled.
Keep alcohol away from heat, sparks, skin, and avoid contact with eyes.
Page 2 of 13
Splicer Kit
Description
Quick evaporating cleaner
or isopropyl alcohol
(>97% 2-propanol+water)
®
products, visit us on the web at
™
Network Partner.
www.commscope.com
Adhesive tape
Clips (to hold yarn)
http://www.commscope.com/
Advertisement
Table of Contents
