Checking the Torque of the
Transmission Output Shaft
Nut
Service Interval: Yearly
Torque the nut
(Figure
tapered shaft to 285 to 353 N∙m (210 to 260 ft-lb).
Figure 46
1. Transmission output shaft nut
46) on the transmission output
Brake Maintenance
Adjusting the Parking
Brake
If the parking brake does not hold securely, an
adjustment is required.
1.
Park the machine on a level surface.
2.
Shut off engine and wait for all moving parts to
stop.
3.
Check the air pressure in the drive tires.
Note:
If needed, adjust to the recommended
inflation; refer to
the Tires (page
4.
Loosen the jam nut on the brake cable under
the console
g025989
1. 7.9 cm (3-1/8 inch)
5.
Engage the parking brake
6.
Adjust the jam nut position until 7.9 cm (3-1/8
inch) from the bottom of the link to the bottom of
the spring
7.
Secure the adjustment of the cable by tightening
the jam nuts
8.
Check the parking brake; if necessary, repeat
steps
4
through 7.
42
Checking the Air Pressure in
40).
(Figure
47).
Figure 47
(Figure
(Figure
47).
(Figure
47).
g025991
47).