STEP 2
Connect the WAN port of your device to a modem, switch, router or Internet with
an Ethernet cable (RJ-45).
DISCLAIMER: This is just a representation of a modem. Modem models and appearance may vary
depending on your Internet provider.
STEP 3
Connect to one of the four LAN ports on your device with an Ethernet cable
(RJ-45) to your equipment or computer that needs to receive an Internet
connection from the DataRemote CDS-9090 device. Your device allows you to
connect up to four (4) devices.
Revision No. 004 April 2020
Page 9