PHASE 5
Testing Fax Lines.
Fax Testing:
1. Connect the respective FXS line that is provisioned for fax to the "Line" port of the customer
Fax machine.
2. Make a test outbound Fax call to a number provided by your Program Manager.
3. Contact Program Manager to return the Fax for inbound Fax testing.
4. Repeat test (Steps 1-3) on both WAN and LTE.
NOTE: if at any point Fax is not working please contact Support.
PHASE 6
Testing Analog Data Lines.
1. Connect the respective FXS line that is provisioned for analog data with RJ-11 cable to the
modem device.
2. Initiate an outbound data call to the receiving station / monitoring company. If you do not
have a number please contact your Program Manager or the site MOD.
3. Request the receiving station / monitoring company call the modem device for a
programming call. If you do not have an external station / company number please contact the
site MOD.
4. Repeat test (Steps 1- 3) on both WAN and LTE.
NOTE: if at any point nodem is not working please contact Support Team.
Post-Installation Tasks.
Present installation checklist to MOD to sign.
Call Tech Check-in/Check-Out line to be released from the site.
Upload all taken & required pictures to your Work Order.
Deliverables.
1. Signed Work Order.
2. Signed Tech Installation Checklist.
3. Required photos.
(continued)
Revision No. 004 April 2020
Page 24