Prep-Installation Tasks - DataRemote Pots In a Box CDS-9090 User Manual

TOOLS LIST FOR TECH (continued)
Flashlight
Cat5 patch cables of varying lengths
Cordless drill/driver with bits to install light-duty ATA mounting bracket to wallboard
All termination tools and line/tone testers
NOTE: Photo of Cable Tester results will be required in deliverables
All hand tools required to make Cat5 cable runs (glow-stick, wire tape, etc.)
Butt Set (or analog test telephone if Butt Set doesn't have an RJ11 plug/jack interface)
Label maker (to label biscuit jacks)
Digital camera with 3.0 mega pixels or higher photo resolution
6" torpedo level
Voltmeter
IMPORTANT! TECHNICIAN MUST FOLLOW THIS MANUAL EXACTLY, AS EACH PHASE & STEP
IS DESIGNED TO ENSURE PROPER MIGRATION. ANY DEVIATION MUST ABSOLUTELY BE APPROVED
BY YOUR RESPECTIVE EMPLOYER ONLY!!
Please review this steps before starting and ensure you bring a printed copy of this guide and
installation checklist to the site, to use it as a reference during the installation.

PREP-INSTALLATION TASKS.

On-site Arrival and Initial Equipment Testing:
1. Upon arrival, call your respective Program Manager on the check-in line to confirm that you are
on-site and be prepared to supply the store number/location ID & city/ST listed on your Work
Order
2. Ask for the Manager On Duty (MOD), and introduce yourself with the purpose of your visit as the
installer for the DataRemote CDS-9090 device.
a. Please report any store access issue to your Project Manager immediately.
3. The DataRemote device was shipped to the site in advance of your dispatch; please obtain this
package from the Manager.
a. IMPORTANT: Please open the package in front of MOD and inspect for a complete kit
per the previous page's material's list; especially if package was already opened when
it was given to you
b. Report any missing equipment immediately to Project Manager.
4. IMPORTANT: ANY directives from on-site store personnel deviating from the norm or outside
the scope of this guide must be relayed to the PM immediately. If you encounter a problem in
the field which requires escalation, please contact the PM immediately (bottom line, contact
PM for approval prior to accepting and acting upon any direction from store personnel
on-site).
Revision No. 004 April 2020
Page 14