Startup Guide; Startup Parameter Back - Alpha-InnoTec Luxtronik Operating Manual

Heating and heat pump controller part 2

Hide thumbs Also See for Luxtronik:

Table of Contents

STARTUP GUIDE

The control unit is equipped with a commissioning assistant.

(startup guide). This assistant will guide you through the most im-

portant settings of the regulator during initial commissioning.

The startup guide can be called up at any time in the "Service"

program area.

You will be guided step-by-step through several selection options

used to set up your heat pump.

For example:

For the number of the control setting, please refer to the hydraulic diagrams we have

published.

For more information on the commissioning assistant, please re-

fer to the corresponding sections in this operating manual.

We reserve the right to make technical changes | 83055400fUK – Translation of the original instruction manual (2.1) | ait-deutschland GmbH

Further queries will follow.

If your heat pump was commissioned by an authorised customer

service partner and the startup parameters have been stored, you

can use this menu item to restore these parameters.

This may be helpful if settings have been changed and let to a

system malfunction. Please Notice that all settings such as heat-

ing curves, system settings, set values will be reset to the values

applicable at commissioning.

The programmed switching times are not affected by this.

You will be guided through the following menu items:

Table of Contents

Show Quick Links

Table of Contents