opticis M5-2A2-TR User Manual

opticis M5-2A2-TR User Manual

Digital video/audio and serial i/o optical extender

Advertisement

www.opticis.com
Digital Video/Audio and
Serial I/O Optical Extender
User's Manual
for the M5-2A2-TR
© 2008 Opticis. All Rights Reserved
Revision 1.0
Opticis Locations
Opticis Co., Ltd.
#304 Byucksan Technopia
434-6 Sangdaewon-Dong, Chungwon-Ku
Sungnam City, Kyungki-Do
462-120, South Korea
Tel:
+82 (31) 737-8033
Fax:
+82 (31) 737-8079
For order support, please contact your Distributor or Reseller.
For technical support, check with the Opticis web site
contact
techsupp@opticis.com
Opticis North America Ltd.
330 Richmond street, Suite 100
Chatham, Ontario
Canada N7M 1P7
Tel: (519) 355-0819
Fax: (519) 355-0520
www.opticis.com
or

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the M5-2A2-TR and is the answer not in the manual?

Questions and answers

Summary of Contents for opticis M5-2A2-TR

  • Page 1 Canada N7M 1P7 462-120, South Korea Tel: +82 (31) 737-8033 Tel: (519) 355-0819 Fax: +82 (31) 737-8079 Fax: (519) 355-0520 For order support, please contact your Distributor or Reseller. For technical support, check with the Opticis web site www.opticis.com contact techsupp@opticis.com...
  • Page 2 Manual Contents Welcome! __________________________________________ Congratulations on your purchase of the M5-2A2-TR, Digital Video/Audio and Manual Contents Serial I/O optical extender. This manual contains information that will assist you Welcome, Product Description in installing and operating the product. System Requirements for Setup...
  • Page 3: System Requirements For Setup

    Notice ; If “DVI” input is selected, HDCP is not supported. Therefore, you The power of M5-2A2-TR is designed to supply to each module of have to choose “HDMI”, if the video source equipment is compliant with Transmitter and Receiver modules by plugging to each of the power HDCP even though video output may be DVI.
  • Page 4 Step 3 Step 5 Connect the Transmitter module to the audio source equipment by audio Remove dust covers and connect two(2) duplex LC fibers to LC receptacles cables such as RCA, S/PDIF coaxial cable and S/PDIF optical fiber. of the Transmitter and Receiver modules, as shown in Fig. 8. Carefully ensure the duplex LC connector is fully engaged.
  • Page 5: Troubleshooting

    Check if the PC and display are powered on and properly booted. 200m (656feet) for WUGA (1,900x1,200) 24bit color at 60Hz • Reset the M5-2A2-TR using Reset button on Uplink and Downlink refresh rate with direct DDC communication. modules. •...
  • Page 6: Warranty Information

    (2) this device must accept any interference received, including interference that service, for a period of one (1) year from the date of purchase from Opticis or may cause undesired operation. This equipment has been tested and found to its authorized resellers.

Table of Contents