Chassis Tilt; Counterweight Uphill; Counterweight Downhill - Skyjack Telescopic Boom Series Operating Manual

Section 2 - Operation

2.15 Chassis Tilt

This section guides the operator with regard to
recovering from an inclined position.
impORTANT
When the boom is raised or extended, the
aerial platform must only be operated on
firm level surfaces.
wARNiNG
When the aerial platform becomes tilted
causing the alarm to sound, the platform
must be fully lowered and retracted
immediately. Drive functions are not
available when the tilt alarm is active.
SKYJACK, Page 

2.15-1 Counterweight Uphill

If the aerial platform becomes tilted with the counterweight
uphill (refer to
return to a lowered and retracted position.
1.
2.

2.15-2 Counterweight Downhill

If the aerial platform becomes tilted with the counterweight
downhill (refer to
return to a lowered and retracted position.
1.
2.
3.
4.
Figure 2-20. Counterweight Uphill
Figure 2-21. Counterweight Downhill
September 007
Figure 2-20) follow the steps below to
Retract the fly boom completely
Drive to a firm level surface.
Figure 2-21) follow the steps below to
Lower the jib to horizontal (if equipped).
Retract the fly boom completely.
Lower the main boom completely.
Drive to a firm level surface.
Chassis Tilt
SJ 40T & SJ 45T