Advertisement
Project
Model Specified:
CONSTRUCTION, HARDWARE AND INSULATION
Cabinet exterior, including front, one piece sides, louver assembly and doors are
constructed of heavy gauge stainless steel. Cabinet interior is constructed of
stainless steel. Exterior cabinet top, back and bottom are constructed of heavy
gauge aluminized steel. The interior floor is constructed of stainless steel and
insulated with
" of resilient cork. A readily attachable stainless steel ramp
3
⁄
4
is provided.
Doors are equipped with removable plug cylinder locks and guaranteed for life cam-
lift, gravity action, self-closing metal, glide hinges with stay open feature at 120°.
Hinges include a switch to automatically activate the interior incandescent lighting.
Guaranteed for life, work flow door handle is mounted horizontally over recess in
door which limits protrusion from door face into aisleways.
Vinyl magnetic door gaskets assure tight door seal and are easily removable for
cleaning. Cabinet contains high density, non-CFC, foamed in place polyurethane
insulation.
DIMENSIONAL DATA
Net Capacity cu. ft.
Length - Overall in.
Depth - Over Body in.
Depth - with door open 90°
Depth - Overall in.
Clear Door Width in.
Clear Full Door Height in.
Height - Overall in.
ELECTRICAL DATA
1
Voltage
Feed Wires with Ground
Full Load Amperes
REFRIGERATION DATA
1
Refrigerant
BTU/HR
(HP)
2
CARTON DIMENSIONS
Length - Crated in.
Depth - Crated in.
Height - Crated in.
Volume - Crated cu. ft.
WEIGHT DATA
Net Weight - Uncrated lbs.
Gross Weight - Crated lbs.
NOTE: Figures in parentheses reflect metric equivalents.
1= Wattage is determined by listed amps X listed volts X an average run time of
70% for refrigerators and 80% for freezers.
2= Based on a 90 degree F ambient and 20 degree F evaporator.
Equipped With One NEMA L14-20P Plug
Full load amps and plug style may vary depending on
electrical options chosen and condensing unit employed.
REQUIRED CLEARANCES
In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes. Therefore, the operating location must either have a minimum of 12"
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12" above is required in order to perform certain maintenance tasks.
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.
Continued product development may necessitate specification changes without notice.
Part No. TR35852 (revised 1/07)
TRAULSEN
SECTION
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
7-9
Website: www.traulsen.com
Specifications
RET232LUT-FHS
74.3 (2105 cu l)
68 (172.7 cm)
32 (81.3 cm)
63
(160.7 cm)
1
⁄
4
35
(90.3 cm)
9
⁄
16
27
(68.8 cm)
1
⁄
8
66
5
(168.4 cm)
⁄
16
83
1
(211.5 cm)
⁄
4
208/115/60/1
4
16.0
R-404A
3790 (3/4 HP)
73 (185 cm)
44 (112 cm)
92
1
(235 cm)
⁄
2
172 (4872 cu l)
700 (318 kg)
865 (392 kg)
NOTES
Quantity
REFRIGERATION SYSTEM
A top mounted, self-contained, balanced refrigeration system using R-404A
refrigerant is conveniently located behind the one-piece louver assembly. It features
a plenum effect blower, large, high humidity evaporator coil located outside the food
zone, coated with a plastic to retard corrosion, and a top mounted non-electric
condensate evaporator. Heaters and fans mounted in the mullion facilitate the
even-thaw process. A cord and plug is supplied standard. Standard operating
temperature is 37-41°F.
INTERIOR ARRANGEMENTS
This model is designed to accommodate two (2) roll-in racks. Readily removable,
interior mounted, stainless steel guides for racks are provided for protection.
Maximum rack size with wheels inboard of frame is 27" wide by 29" deep by 66" high.
Racks supplied by others.
WARRANTIES
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard. An optional 2
and labor warranty is also available.
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
Item #
CSI Section 11400
Elevation - RET232LUT-FHS
Plan - RET232LUT-FHS
Section - RET232LUT-FHS
nd
year extended parts
Advertisement
