Advertisement
Project
Model Specified:
Construction, Hardware and Insulation
Cabinet exterior, including front, one piece sides, louver assembly and doors are
constructed of heavy gauge stainless steel. Cabinet interior and door liners are con-
structed of stainless steel. Exterior cabinet top, back and bottom are constructed of
heavy gauge aluminized steel. A set of four (4) adjustable 6" high stainless steel
legs are included.
Doors are equipped with removable plug cylinder locks and guaranteed for life cam-
lift, gravity action, self-closing metal, glide hinges with stay open feature at 120 de-
grees. Guaranteed for life, work flow door handle is mounted horizontally over re-
cess in door which limits protrusion from door face into aisleways.
Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.
Cabinet and door contains high density, non-CFC, foamed in place polyurethane
insulation.
DIMENSIONAL DATA
Net capacity cu. ft.
Length - overall in.
Depth - overall in.
Depth - over body in.
Depth - with door open
90 degrees in.
Clear door width in.
Clear full-door height in.
Clear half-door height in.
Height - overall on 6" legs
Pan Capacity - 18" x 26"
Pan Capacity - 14" x 18"
Net Wt. lbs.
ELECTRICAL DATA
Voltage
Feed wires with Ground
Full load amperes
REFRIGERATION DATA
Refrigerant
BTU/HR H.P.
2
NOTES
NOTE: Figures in parentheses reflect metric equivalents.
1= Wattage is determined by listed amps X listed volts X an average run
time of 70% for refrigerators and 80% for freezers.
2= Based on a 90 degree F ambient and 20 degree F evaporator.
Uses One NEMA 5-20 P Plug
Full load amps and plug style may vary depending on electrical op-
tions chosen and condensing unit employed.
NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and
any additional warranties.
Continued product development may necessitate specification changes without notice.
Part No. TR35805 (revised 1/07)
TRAULSEN
SECTION
4401 BLUE MOUND RD.
PHONE 1 (800) 825-8220
7-3
Website: www.traulsen.com
Quantity
Specifications
Refrigeration System
A top mounted, self-contained, balanced refrigeration system using R-404A refriger-
ant is conveniently located behind the one piece louver assembly. It features a ple-
num effect blower coil, large, high humidity evaporator coil located outside the food
zone, and a top mounted non-electric condensate evaporator. Heaters and fans
mounted in the mullion facilitate the Even-Thaw process. Standard operating tem-
perature is 37 to 41°F.
Interior
Standard interior arrangements include twenty eight (28) #1 tray slides 4" O.C., four-
teen per section. Each pair of tray slides can accommodate either: (1) 18" x 26" or (2)
14" x 18" pans.
Warranties
Both a one year parts and labor warranty and a five year compressor warranty (self-
contained models only) are provided standard. An optional 2
and labor warranty is also available.
RET232NUT
46.0 (1303 cu l)
52
1
(132.4 cm)
⁄
8
35 (88.8 cm)
32 (81.3 cm)
55
(141.6 cm)
3
⁄
4
21
1
(53.6 cm)
⁄
8
57
(146.3 cm)
5
⁄
8
27
(69.9 cm)
1
⁄
2
83
1
(211.5 cm)
⁄
4
28
56
560 (254 kg)
115/60/1
3
16.0
R-404A
4240 (1/2 HP)
FT. WORTH, TX 76106
FAX-MKTG. 1 (817) 624-4302
Elevation - RET232NUT
Plan - RET232NUT
REQUIRED CLEARANCES
In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes. Therefore, the operating location must either have a minimum of 12"
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12" above is required in order to perform certain maintenance tasks.
Item #
CSI Section 11400
nd
year extended parts
Section - RET232NUT
Advertisement
