Husqvarna 535iFR Operator's Manual page 13

Cutting equipment and guards
The product have different cutting attachment guards for
the cutting equipment that can be used. Make sure that
you use the correct cutting attachment guard for the
cutting equipment. Refer to
• Grass blade guard and grass blade.
• Trimmer guard and trimmer head.
• Saw blade guard and saw blade.
Assembly of the grass blade guard and the
grass blade
To attach the grass blade guard
• Put the grass blade guard (A) onto the shaft and
tighten the bolt.
609 - 001 -
Technical data on page 28 .
A
To remove the grass blade guard
• Remove the bolt and remove the grass blade guard
(A) from the shaft.
To attach the grass blade
1. Put the gear of the product on a flat surface to make
sure that the blade is assembled correctly.
2. Turn the output shaft to align one of the holes in the
drive disc (B) with the related hole in the gear
housing.
3. Put the locking pin (C) in the hole to lock the shaft.
4. Put the grass blade (D), the support cup (E) and the
support flange (F) on the output shaft.
D
C
A
5. Make sure that the drive disc and support flange
engages correctly in the center hole of the grass
blade.
6. Attach the nut (G).
A
G
F
E
B
13