The Float Valve - Instant Pot DUO EVO PLUS Series User Manual

Overview of Pressure Control Features

The Float Valve

Pressurised
When the float valve is popped up, it
indicates the cooker is pressurised.
Remove the Float Valve from the Lid
Place one finger on the top of the float valve, then turn the lid over. Detach the
silicone cap from the bottom side of the float valve. Remove the float valve from
the top of the lid.
Do not discard the float valve or silicone cap.
Install the Float Valve
Drop the narrow end of the float valve into the float valve hole on the top of the lid.
Place one finger on the top of the float valve, then turn the lid over. Firmly attach
the silicone cap to the bottom of the float valve.
Do not attempt to operate the pressure cooker without the float valve and/or
silicone cap properly installed in the pressure cooking lid.
Illustrations in this document are for reference only and may differ from the actual product.
Always refer to the actual product.
While the float valve is up, contents of cooker are under extreme pressure. Do not
DANGER
attempt to remove the lid. All pressure must be released, and float valve must
be down before opening the lid. Refer to
pressure. Failure to follow these instructions may result in property damage and/or personal injury.
26
Top
Depressurising the Cooker
Depressurised
When it is lowered into the lid, it
indicates the cooker is depressurised.
Bottom
for information on releasing