Argo LOOP Operating Instructions Manual page 9

Remove the front guard and clean it with soft cloth.
Unscrew the cap nut of the blade in counter-clockwise direction and remove the blade with caution. Clean then the blade
with a soft cloth.
When the cleaning is completed, you could re-install the appliance in a opposite order of the installating procedures
mentioned as above.
STORAGE
If the appliance is not used for prolonged periods, disconnect the power cord and store the appliance with this manual in
its original packaging, in a cool and dry place. In the event of a prolonged period of inactivity, remove the battery from the
remote control.
V 12/19
19