Table of Contents
Advertisement
Quick Links
EN
TABLE FAN
TABLO EVO BLACK
TABLO EVO WHITE
OPERATING INSTRUCTIONS
Read the instructions carefully before operating the appliance or carrying out maintenance operations.
Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage.
Keep these instructions in a safe place for future reference.
V 01/21
12
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Argo TABLO EVO
Summary of Contents for Argo TABLO EVO
- Page 1 TABLE FAN TABLO EVO BLACK TABLO EVO WHITE OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage.
-
Page 2: General Safety Information
GENERAL SAFETY INFORMATION Use this fan only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people. Ensure that the mains power complies with the voltage specified on the fan ’s data plate (220-240V~/50Hz). - Page 3 The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by unplugging the appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner. Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth rinsed in hot soapy water.
-
Page 4: Description Of Parts
Do not place the fan on soft surfaces, like a bed, where openings may become blocked. Always place the fan on a stable, flat, level surface when operating, to avoid the chance of the overturning. Locate the power cord so the fan or other objects are not resting on ... - Page 5 FAN ASSEMBLY INSTRUCTIONS The device does not require installation. For its use it is necessary to assemble the parts, as per the instructions below. Open the package and take out the parts of the appliance. Remove the Blade Cap from the Motor Shaft by turning it clockwise, and remove the Plastic Mounting Nut from the Fan Head by rotating anti-clockwise.
- Page 6 BASE ASSEMBLY INSTRUCTIONS Place the power cable in the appropriate groove (between points E F in figure 1), then assemble the 4 points (figure 1) by rotating the base clockwise. Make sure that the base is correctly assembled, as shown in figure 2. Figure 1 Figure 2 V 01/21...
-
Page 7: How To Use The Appliance
HOW TO USE THE APPLIANCE Connect the power cable to an appropriate power socket (220-240V ~). Place the fan upright on a flat, stable surface. Do not use this fan in an area with high humidity, rich in dust or water. Press ON / OFF on the control panel or remote control. -
Page 8: Remote Control
It is possible to adjust the angle of inclination of the fan assembly. Turn off the fan, slightly loosen the adjustable screw by turning it counter-clockwise. Place the fan assembly in the desired angle, then tightly screw the adjustable screw by turning it clockwise. -
Page 9: Maintenance And Storage
The functions on the remote control correspond to the functions on the control panel. HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the drawing below). Open the battery door on the back of the remote control and remove the door. Insert the batteries in the remote control (not supplied), taking care to check the correct positioning of the polarity. - Page 10 INFORMATION FOR THE CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN DIRECTIVE 2012/19/EU This appliance may not be scrapped with domestic waste at the end of its life cycle. We call your attention to the crucial role played by the consumer in the re-use, recycling and other forms of recovery of such waste. The appliance must be scrapped by a sorted waste disposal centre or by returning it to the retailer (no charge is levied for this service), when you purchase a new equivalent appliance.
Need help?
Do you have a question about the TABLO EVO and is the answer not in the manual?
Questions and answers