Table Of Contents - STEINEL IR 180 KNX Application Description

Contents
Application description for presence detectors
with constant-lighting control
1. Detector functions ................................................................ 03
1.1 Presence detection ........................................................ 03
1.2 Lighting control ............................................................. 03
1.3 HVAC control ................................................................. 03
2. Presence detector operating modes ................................... 03
2.1 Single detector ............................................................... 03
2.2 Master ........................................................................... 03
2.3 Slave .............................................................................. 03
2.4 Master in parallel mode .................................................. 03
3. Constant-lighting control ...................................................... 03
3.1 Switching ON/OFF with constant-lighting control............ 03
3.2 Overriding constant-lighting control ............................... 04
3.3 Disabling / enabling constant-lighting control .................. 04
4. Switching mode .................................................................... 04
5. Fully/semi-automatic operation ........................................... 04
6. IR remote controls ................................................................ 04
Application description for presence detectors with constant-lighting control
7. Test mode .............................................................................. 04
8. Behaviour after a bus voltage failure and return as
well as on re-starting and downloading .............................. 04
9. Behaviour after initial start-up and unloading ..................... 05
10. Communication objects ....................................................... 05
11. Parameters ............................................................................ 10
11.1 "General Settings" parameter window .......................... 10
11.2 "Reach Settings" parameter window............................. 11
11.3 "Presence" parameter window ...................................... 11
11.4 "Lighting" parameter window ........................................ 12
11.5 "Light-Level Controller" parameter window ................... 13
11.6 "HVAC" parameter window ........................................... 14
11.7 "Light Level Measured" parameter window ................... 14
11.8 "Scene Control" parameter window .............................. 14
11.9 "Basic Illumination" parameter window ......................... 15
11.10 "Sabotage" parameter window ..................................... 15
11.11 "Temperature Measured" parameter window ................ 15
11.12 "Humidity Measured" parameter window ...................... 16
11.13 "Encoder Button" parameter window ............................ 16
11.14 "Scene Control Button" parameter window ................... 16
11.15 "Internal Switching/Dimming Button"
parameter window ........................................................ 16
- 2 -