To Adjust The Airflow Rate; Airflow Direction; To Adjust The Airflow Direction; To Adjust The Louvers (Vertical Blades) - Daikin Siesta ATXF50A2V1B User Reference Manual

5 | Operation

5.4.1 To adjust the airflow rate

5.5 Airflow direction

5.5.1 To adjust the airflow direction

5.5.2 To adjust the louvers (vertical blades)

User reference guide
18
1 Press to change the airflow setting as follows:
When. Adjust the airflow direction as desired.
What. The system directs the airflow differently, depending on the user selection
(swinging or fixed position). It does so by moving the vertical blades.
Setting
Vertical auto swing
[—]
CAUTION
▪
ALWAYS use a user interface to adjust the angle of the flap. When the flap is
swinging and you move it forcibly by hand, the mechanism will break.
▪
Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at
high speed.
Note: The movable range of the flap varies according to the operation mode. The
flap will stop at the upper position when the airflow rate is changed to low during
the up and down swing setting.
a
b
c
a Flap range in cooling or drying operation
b Flap range in hating operation
c Flap range in fan only operation
1 To use auto swing, press
Result: will appear on the LCD.
Result: The flap (horizontal blade) will begin to swing.
2 To use fixed position, press
Result: disappears from the LCD.
1 Hold 1 or both knobs and move the louvers.
Airflow direction
Moves up and down.
Stays in a fixed position.
.
when the flap reaches the desired position.
ATXF50~71A2V1B
Daikin room air conditioner
4P513685-6C – 2019.12