3
|
About the system
3.2 About the user interface
User reference guide
10
a
Air inlet
b
Air outlet
c
Flap (horizontal blade)
d
Louvers (vertical blades)
e
Front panel
f
Model name plate
g
Room temperature sensor
h
Signal receiver
i
Operation indicator (green)
j
Timer lamp (orange)
k
Indoor unit ON/OFF switch
l
Air filter
ON/OFF button
If the user interface is missing, you can use the ON/OFF button on the indoor unit
to start/stop operation. When operation is started using this button, the following
settings are used:
▪
Operation mode = Automatic
▪
Temperature setting = 25°C
▪
Airflow rate = Automatic
▪
Direct sunlight. Do NOT expose the user interface to direct sunlight.
▪
Dust. Dust on the signal transmitter or receiver will reduce sensitivity. Wipe off
dust with a soft cloth.
▪
Fluorescent lights. Signal communication might be disabled if fluorescent lamps
are in the room. In that case, contact your installer.
▪
Other appliances. If the user interface signals operate other appliances, move
the other appliances, or contact your installer.
▪
Curtains. Make sure that the signal between the unit and the user interface is
NOT blocked by curtains or other objects.
NOTICE
▪
Do NOT drop the user interface.
▪
Do NOT let the user interface get wet.
ATXF50~71A2V1B
Daikin room air conditioner
4P513685-6C – 2019.12