ProFlow PF-OXY1 Installation & Operating Instructions Manual page 12

PROGRAMMING INSTRUCTIONS -
BASIC SETTINGS

Before entering the programming mode, make sure that
the appliance is in the service mode.
1. Press the scroll button; the display will show:
Language:English
Press the up or down

language.
2. Press the scroll button again; the display will show:
Set time:
Press the up button or down

time of day.
3. Press the scroll button again; the display will show:
Interval:4 Days
Press the up or down

of days between regenerations.

The filtration capacity of the appliance mainly depends
on the daily water usage and the Iron/Manganese content
in the water; many other factors may also have a significant
impact on the filtration capacity. Therefore it is
recommended to regenerate the appliance on a regular time
basis. In most applications a regeneration every 4 days
should be sufficient.

In case of extreme iron/manganese content and/or
water consumption, it is recommended to lower the
regeneration interval to 1 or max. 2 days.
EN - English
ELECTRONIC CONTROL PANEL
button to set the
8:01
button to set the
button to set the number
Page 12