1.0 - INTRODUCTION Your new Instanta Boiler is designed to give years of trouble-free service provided that the instructions contained in this manual are followed. All new Instanta products are energy efficient, simple to operate and easy to service. 2.0 - WARNINGS & PRECAUTIONS Please read the following carefully before starting work on this equipment.
3.0 - CHECK LIST Before starting installation check that you have the following parts: Under-counter boiler Counter-top water Font (c/w rubber water tube, electrical plug & earth lead) Drip-tray drain kit Paper template (hole positions for fixing water font to counter-top) 1.5mtr long Water Hose (WRAS approved –...
• If any hose not supplied by Instanta is used to connect the machine, the guarantee could be invalidated and contamination may occur. PLEASE NOTE: Washing machine hoses (usually red, black or blue,) are not suitable for drinking water and will cause a very bad taste to the water.
Page 5
If you have any queries in this respect, please contact our customer services team. WE REGRET THAT INSTANTA CANNOT BE HELD RESPONSIBLE FOR SCALE RELATED PROBLEMS IF A SCALE REDUCER HAS BEEN INSTALLED MAIN UNIT OVERFLOW A 15mm push-fit overflow connection point is provided [right-hand side of under-counter unit].
6.0 - OPERATION IMPORTANT: SWITCH MACHINE UNTIL INSTALLATION COMPLETE ELECTRICAL/PLUMBING CONNECTIONS HAVE BEEN MADE. ●Switch machine on by pressing the small button at the top of the display panel [under-counter unit]. The boiler will run through an initial self diagnostic check and various messages will display within the window.
Page 7
Top-up feature: • At the end of the timed dispense cycle, the “CAUTION” message will continue to flash for a further 5 seconds. During this 5-second window, the water level in the cup or teapot can be topped-up by simply pressing & holding the dispense button. NOTE: Once the “CAUTION”...
Page 8
Apart from scale removal no regular maintenance should be required. Spare parts and accessories are available from Instanta Limited – Tel: 01704 501114 and ask for spares DE-SCALING: To de-scale your machine, first disconnect from power supply and allow to cool down.